Maintenance And Service of Peanut Butter Grinding Machine Colloid Mill:
1. Check the colloid mill pipe and the junction is not loose phenomenon. Turn the colloid mill by hand and see if the colloid mill is flexible.

2. To the bearing body by adding bearing lubricating oil, oil level should be observed in the oil standard center line, the oil should be replaced or added.

3. Unscrew the colloid pump body of the water plug, pouring water (or pulp).

4. Off the gate valve and outlet pressure gauge and inlet vacuum gauge.

5.  Jog motor, try the motor steering is correct.

6. Start the motor, when the colloid mill after the normal operation, open the outlet pressure gauge and import the vacuum pump as it shows the appropriate pressure, gradually open the gate valve, while checking the motor load situation.

7. Try to control the flow of colloid mill and head in the range marked on the label to ensure that the colloid mill in the most efficient operation, in order to obtain the maximum energy saving effect.

8. Colloid mill in the course of operation, the bearing temperature can not exceed the ambient temperature of 35C, the maximum temperature shall not exceed 80C.

9. If the colloid is found to have an abnormal sound, the cause should be checked immediately.

10. Colloid mill to stop using the first, close the gate valve, pressure gauge, and then stop the motor.

11. Colloid mill in the first month of work, after 100 hours to replace the oil, after each 500 hours, oil change once.

12. Often adjust the packing gland, Shanghai is Austrian Pump Manufacturing Co., Ltd. to ensure that the filling room indoor drip normal (in order to drop the drain is appropriate).

13. Regularly check the wear of the sleeve, wear a larger change should be timely.

14. Colloid mill in the winter season when used, after stopping, the need to remove the lower part of the pump drain plug the media put the net. To prevent cracking.

15. Colloid mill long-term use, need to pump all open, dry water, the rotating parts and joints coated with grease installed, properly preserved.